Here are the top best Mold in car voted by users and compiled by us, invite you to learn together
As car owners, we do not like to see any dirt in the car. May it be inside or outside, they are unpleasant to the eyes. If you got mold inside the car, you would not be comfortable driving, nor just simply sitting on it. So how can you remediate this problem?
Well, steps on how to remove mold from your car interior are discussed in this section. Let’s read them and find out!
Table of Contents
What You Will Need
Here’s what you are going to include in preparing to clean mold out of car:
Steps to Remove Car Mold
Step 1: Get ready
Cleaning mold from car interior is not just as simple as wiping dust off the car. Before getting the job done, never forget to put on your protective equipment.
Make sure that your hand gloves are put on, preferably the non-porous ones, so that chemical cleaning agents may not get on the skin of your hands.
Aside from your PPE, putting near you the things you’ll need will help you get mold out of car interior faster.
Step 2: Find a good place to clean
Get mold out of car upholstery by placing your car in a well-lit area.
Related: Steps to DIY car upholstery cleaner.
Step 3: Pre-clean the car interior
Clean your car interior from other stuff. Throw away the trash, put off car pillows and car mats, and partially wipe visible dust and dirt. You may use a vacuum cleaner for stubborn dust.
Make sure that all items contacted with molds are thrown to avoid spreading them around. By doing this, you minimize the contact of white mold in car to other items inside it.
Step 4: Spray the molded portions
Use a new plastic spray bottle to fill with pure white, distilled vinegar.
Vinegar is a great cleaning agent having strong antifungal properties that allow molds to stick to it, this is an excellent mold remover for car interior.
After filling the bottle, spray it to the affected area or where molds thrive the most. Wait for about ten minutes to let it soak over the solution.
Brush the area after soaking it. Spraying and brushing can be done repeatedly, as often as needed. Then, wipe those portions with a microfiber towel.
Step 5: Dry the sprayed parts
After wiping all the sprayed parts, let them dry using a car blower or a vacuum cleaner for easy and fast drying.
You can also bring the car windows down to allow air passage inside the car and have them naturally dried up.
When they are all dried up, check whether the cleaning was well done. If not, you can always go back to satisfy yourself with the outcome.
Step 6: Assess your work
In case molds are still present after several cleanings, you may seek help and have your car undergo a professional car mold removal.
What Are the Alternatives of Mold and Mildew Remover for Car Interior
If you use a grapefruit seed extract, have at least ten drops of it in a cup of water, then mix thoroughly.
If you use lemon juice, have one cup of it mixed with a cup of water. Let the mixture penetrate much in the molded area to avoid them from recurring.
Helpful Tips
How to Avoid a Mold-Infested Car
Having a car infested with molds can be so disgusting. The very noticeable manifestation of it is the unpleasant smell it gives inside the car, especially the very first time the car is opened on a certain day.
To avoid experiencing this, here are a few reminders for you to take note:
When you notice a wetted seat or floor, or worse comes to worst, a big spill in the car, wipe it immediately. Do not wait for it to dry itself. It is the common reason for a mold-infested car.
An open car window can be an entry for water or moisture. This can leave the car with wet sections and be mold-infested soon.
Since molds are fungi, it is best to disinfect your car interior when the need arises. A well-cleaned and disinfected car will give molds a lesser chance to thrive.
As much as possible, do not use your car as your dining place. Unless you have time constraints and eating out may take you a longer time, this can be a consideration. But, if you make it a habit, this can be a source for mold makeup.
Conclusion
Molds inside the car are a common problem car owners encounter. Mold removal may entail professional services from car cleaning companies. However, you can do it on your own with the right tools.
There are many different alternatives on how to remove mold from your car interior. If you will also religiously follow the helpful reminders, you can finally have a mold-free vehicle again.
